Tag Archives: Plumbing

It’s Your Fault: Homeowners and Plumbing Mistakes

a plumber fixing the pipesWhile DIY plumbing ideas and repairs are not entirely bad, they can sometimes do more harm than good. This is especially true if you don’t know what you are doing or if you solely rely on guides and videos when dealing with any plumbing issue. There are also instances where your habits or the way you treat your plumbing are to blame for all the clogs, leaks, and problems you are experiencing.

Plumbing companies like Expert Plumbing, Heating, Air and Electrical and 24-hour plumbers in Orem share the biggest mistakes you might be making with your plumbing:

Overloading the garbage disposal

Your garbage disposal may be helping you reduce waste at home, but you shouldn’t put things that don’t belong down the drain. These include fibrous food (like celery sticks and onion skins), pasta, bones, potato peels, and grease. Check out this list to know the other things you should put in your disposal.

Using drop-in toilet fresheners

While they can make your toilet water blue, toilet fresheners usually contain chemicals that can compromise the parts inside the tank. The tablet can also get stuck in the flush valve when they disintegrate, causing flushing problems in the toilet.

Forgetting to replace the hose

Experts suggest replacing the rubber hoses on the dishwashers and washing machines every five years. This is to avoid potential blooding when they burst. You may still want to replace them even if you don’t see any obvious signs of wear.

Using chemicals to clear drains

Chemicals are not just toxic and dangerous to handle, they can also damage or eat away your pipes. Instead of using chemicals, it is best to use or make an eco-friendly drain cleaner. You should also keep hair, grease, and other clog culprits out of drain to prevent clogs in the first place.

These are just a few of the things that can ruin your plumbing or cause expensive plumbing repairs. Also, do take note that even if you have been once successful in tackling a minor plumbing issue, don’t assume that you can handle most of the problems that may arise. It’s best to call a pro or a 24-hour plumber who can fix the issue faster the first time around.

Plumbing maintenance

Factors That Affect the Integrity of Your Plumbing System

Plumbing maintenanceMaintaining the integrity of your house’s plumbing is essential in keeping water flowing to where you need it. This is not really an impossible task. The trick is to ensure regular maintenance by a professional plumber.

The most common condition that requires emergency plumbing Salt Lake City is burst pipes. Experts at Action Plumbing explain that burst pipes can cause extensive water damage to your property. Burst pipes may take long to discover because most pipes are hard to access. To prevent plumbing problems from occurring, be aware of factors that affect the integrity of your pipes.

Increased Water Pressure

When your pipes clog, water pressure in them builds up and, if left unattended, may become too much for your plumbing to handle. High water pressure is, in fact, the most common cause of bursting pipes. Routine maintenance can help to prevent frequent clogs, keeping water pressure at optimum levels.

Freezing Temperatures

Most pipes are located in hidden areas of your house. The heat from your heating system typically does not reach your plumbing system. In cold temperatures, the water in your pipes freezes and consequently expands. The stress caused by this frozen water can weaken your pipe’s walls, causing them to burst.

Encroaching Tree Roots

Tree roots are common causes of burst pipes. Roots naturally grow towards water. Any weak point in your plumbing system is a target for root encroachment. Roots then wrap around your pipes, eventually affecting their integrity.

Insulating your water pipes in freezing weather conditions is vital in preventing frozen water in your pipes. Correct installation in the right location will minimize root encroachment. Frequent and professional maintenance is essential in preventing clogging in your pipes.

Water damage from burst pipes will cost you much. Get an expert plumber to advise you on measures to maintain the integrity of your pipes.

What to Look for in a Tankless Water Heater

Termperature knob of a tankless water heaterThe tankless water heater is booming, especially this season. As more people need a reliable source of hot water for their needs in winter, companies release new and improved models. This means you are spoiled for options and might even be confused on which model to buy.

Here are three factors to consider when choosing a tankless water heater in Utah:

Ideal Size

Bigger doesn’t mean more powerful when it comes to tankless heaters. There are small models that pack a punch, and you can place them anywhere in the house. Thanks to their size, even a small cupboard or unused cabinet will do. This means there will be no need for you to set aside a big space just to accommodate the heater. However, this does not mean the smallest size is the best option for you. Consider the number of people in the house and the daily hot water usage of the whole family.


When it comes to comfort, every additional degree is important. You want hot, not scalding water. You do not want lukewarm water when it’s freezing outside. Several options with digital control settings are available, and they allow you to set the temperature with accuracy. This is a good reason to upgrade your old water heater to a newer model, as well.


You do not want to purchase a water heater that will not serve you for a long time. You are looking for value for money. Thankfully, there are products that come with a lifetime warranty to give you just that. With a lifetime warranty, as long as you own the water heater, you can have it inspected and maintained in the event that it stops working.

A water heater purchase is just like any other important purchase. You want the best that your money can buy, so choose wisely.

4 Most Common Plumbing Problems At Home

Most homeowners will call a plumber at least once every year. They do so Plumbing Systembecause they need immediate plumbing services, which include repairing leaking faucets, unblocking drains, and replacing broken pipes, among many others.

Homeowners deal with a variety of plumbing problems, and All Hours Plumbing and HVAC reveals the five most common ones:

1. Dripping Faucet

A dripping faucet can keep you awake at night, lead to water stains, and cause floods in the bathroom or kitchen. Damaged parts are probably the biggest reason for a leaking faucet. The solution is to replace the washer inside the tap itself. A worn-out carriage can also be the cause of the problem. Sometimes, the leaking faucet can be the result of high water pressure.

2. Leaky Pipes

For most pipes, leaking begins near the joints. Hard water is one of the major causes of leaky pipes. The limescale, which is made of calcium and magnesium deposits, builds up in the plumbing system and reduces the flow of water through the pipes.

In time, your water pressure drops, increasing the limescale build up. Eventually, the pipes become completely clogged and begin to leak. Hard water also causes the pipe to corrode. Using a water softener is a good way to solve the problem.

3. Leaking Hose Bib

Leaking hose bibs are common during summer and spring. After a long, cold winter season, hose bibs that are not well-protected crack and begin to leak. A great solution is to invest in a frost-proof hose bib. It reduces the risks of experiencing future leaks.

4. Faulty Water Heater

Water heater problems may occur due to a tripped circuit breaker or a faulty electric thermostat. Depending on maintenance, a water heater can last anywhere between 8 and 12 years.

Plumbing problems become more severe when ignored, so call a plumber whenever you notice something unusual with the pipes, heater, or any other components of the system. Immediate servicing can make your plumbing system work better for longer.

4 Things That Signal the Need for Plumbing Replacement

PlumbingWhen the life of your plumbing system ends, your efforts to prolong it will probably hit a dead end. Plumbing fixtures — trench drains, taps, bathtubs, dishwashers, toilets, and so on — rust, crack, and start to fail over time. Plumbing repairs may keep these going for some time, but it's best to know when they need replacement.

Connect Building Services and other plumbing service providers noted that you can determine whether your fixture is beyond repair. Here's a guide to help you:

1. Fixtures That are Beyond Their Lifespan

It is true that replacing all plumbing fixtures in your home can be costly. When you consider all the safety and health risks of staying with an older system, however, you realize that it's not worth it. For example, pipes from the 1970s break easily and replacement is the obvious solution.

2. Broken Porcelain

Porcelain toilets can stay for decades, but there is always the likelihood of something hitting them. When a crack develops on this material, no manner of repairs can return their original functionality and look. This is when you need to shop around for a new fixture.

3. Increased Usage or Higher Number Of Users

Your plumbing system may have served you since you installed it, but an increase in usage means more strain. If the number of people using your systems has increased, your plumbing will probably demand replacement soon. This happens even for systems designed for millions of liters. Therefore, let a professional plumber analyze your system and give you suggestions on the course of action.

4. Leaking Fixtures

Most people repair leaks and live with their fixtures for longer periods. The leaks can be obvious (or not) and recurrent that only a replacement will give you peace of mind. Some fixtures are also affordable that it would make sense to have one installed to solve the problem for the last time.

Plumbing fixture problems can be deceptive, especially when they're underneath the surface. If you notice these or any other problem, you might want to contact a plumbing contractor for immediate inspection, repair, or replacement.


Get Rid of Water Hammer Sound Effectively

Plumbing in San Diego Visualize yourself racing at breakneck speeds only to realize the road up ahead is closed. You slam on the brakes as hard as you can, but you know there’s no way to stop. Then, bang! Imagine water moving along your pipe at the same breakneck speeds, only to come to an abrupt halt because of a closed valve. The result: water hammer!

What is Water Hammer?

Water hammer is the sound of water slamming against the wall of the pipes as it comes to an abrupt stop. While this may seem normal to you, it’s a symptom of a bigger issue. Whether or not the valves are closed, water should still be able to flow naturally to produce an even and steady sound. This is aided by the air chamber found at the junction of the pipe and the faucet. The air chamber absorbs the shock coming from the abrupt cessation of water movement.

What You Need to Understand about Water Hammer

Because water hammer is the sound produced by water as it comes to an abrupt stop in narrow pipes, you need to understand that distance, time, and velocity can all significantly affect it.

The longer the distance water travels, the greater its forward momentum, hence the greater the force needed to stop it. The faster the valve closes, the more abrupt is the stopping of the water’s forward momentum. The faster the water goes, the greater the tendency to create water hammer.

Unless you’re backed by a San Diego plumbing company, Perry Plumbing says you should know how to best address water hammer.

How to Fix Water Hammer

The air chamber is one of the most important components of your plumbing system. Make sure it’s fully functioning so that it can absorb the impact of slamming water. You need to shut off the main water valve and open the faucet located on the highest part of your house.

Open the faucet in the lowest part of your house to help facilitate the complete draining of water from the pipes. After that, close the lowest faucet and then reopen the main water valve. This should push all of the remaining air in your pipes, but retain the air inside the air chambers.

While many homeowners don’t necessarily look at water hammer as inherently bad, over time, this can lead to pipe and valve damage. When severe enough, it can weaken the entire pipe joint. Ensure air cushion in the air chamber to help eliminate water hammer.